Most missed balls in a club match are not missed because the swing was complicated. They are missed because the player arrived late, off balance, or still moving the wrong way. Footwork is the work of getting to the ball, setting yourself to hit, and getting back to a recovery spot in time for the next one.
The movement patterns below come from the Lawn Tennis Association's footwork guide. The split step — the small hop that starts that movement — is taken from official USTA coaching materials. Both are coaching methods, not rules of tennis.
The short answer
- Three basic movements do most of the work: sidesteps, the crossover and the run. The LTA says running is generally the quickest way to the ball, often combined with the other two as you arrive and recover.
- Big steps, then little steps. Close the gap with longer strides so you are roughly in place before the ball bounces on your side. Then use smaller adjustment steps to set your balance to hit.
- Hit, then push back. Recover towards the middle area of the court. Use your outside leg to push back after the shot, whether you hit from a closed or an open stance.
- Split-step as your opponent hits. USTA adult-lesson cues tell players to split-step as the partner, or opponent, contacts the ball, then move. At the net, a USTA preparation note says the split step is made as the opponent contacts the ball, after which the body and racket move together.
Three ways to move
The LTA describes three basic movements as the starting point for most footwork exercises at every level: sidesteps, the crossover and the run. Think of a joystick that can send you in any direction, and choose the most efficient movement to arrive quickly and stay balanced before you hit.
Running, the LTA says, is generally the quickest movement to the ball, including a combination of run, crossover and sidesteps to help you get there and recover. You do not have to use only one pattern on a given ball.
Big steps, then little steps
When you move towards the ball, the LTA asks you to think of the path in two parts.
First, use big steps to close the gap so you can get into a rough position before the ball bounces on your side of the net. Then, as you get closer, switch to smaller adjustment steps. Those smaller steps help you set your balance, ready to hit, and transfer your weight through the ball.
The LTA notes that this is particularly important in tricky weather, or on a court that may not have the most even surface — a useful point on many Philippine hard courts after rain or in late-afternoon glare. Our heat and conditioning guide is about pacing yourself in the heat, which is a separate job from this footwork pattern.
Closed stance, open stance, and recovery
The LTA compares a point of footwork to a bleep test: get to the ball, play your shot, then push back to your recovery position in the middle area of the court.
If you have moved to the ball and have plenty of time, you will want more of a side-on, or closed, stance to send the ball back. If you are short on time and more on the run, you will play with more of an open stance: your body open to your opponent's side of the court, with your outside leg loading before you hit.
In both cases, the LTA says, use your outside leg to push back after the shot. That speeds up the recovery and gets you back to the middle of the court more quickly. For players asking how to improve footwork, the LTA adds that practising those recovery steps is one of the fastest ways to get better.
The split step
The split step is the hop that turns a waiting stance into a first step. Official USTA materials describe the timing in plain terms.
In Tennis 101 for Adults, USTA coaching cues for volley and approach activities tell the player to "split step as partner hits the ball." Another rally cue in the same booklet is "quick feet, split step and prepare the racquet." A USTA grips and preparation brochure, in the volley section, says: "A split step is made as the opponent contacts the ball and the body and racquet move together as a unit sideways so that the strings of the racquet face the ball."
That is the beginner version worth practising: be in the air, or landing from a small hop, as the other player makes contact, then push off towards the ball. It applies on the baseline, on the return — see our return of serve guide — and as you come in to volley. Our volley guide covers the punch itself once you have arrived.
The LTA footwork article does not itself use the term split step; the timing above is the USTA's. If a coach teaches a slightly earlier or later hop as you improve, that is still coaching, not a rule.
A drill you can do without a feeder
The LTA's "Fan" drill is a footwork exercise that needs five balls and five markers, not a hitting partner.
Stand in the middle of the baseline. Place markers where each singles tramline meets the baseline, where each singles tramline meets the service line, and one on the centre of the service line. Run, put a ball on a cone, run back, pick up the next ball, and repeat until all five balls are on the cones, in order from left to right or right to left. Keep your head facing the net; do not turn your back on it. Time yourself, then try to beat the time.
Warm up before a fan drill or a long movement session. Our 20-minute warm-up is a better start than sprinting to cones on a stiff ankle.
Sources
- LTA, How to improve your basic footwork in tennis
- USTA, Tennis 101 for Adults: coaching cues to split-step as the partner hits the ball
- USTA, grips and preparation brochure (volley preparation): a split step is made as the opponent contacts the ball; PDF



